|
|
F900GOT Family of Graphic Operator Terminals
The F900GOT Series of Graphical Operator Terminals is a complete line of compact, low cost, high performance interface panels ranging from wide-display touch-screen to basic keypad models. F900GOT Family offers models with color or monochrome displays (STN & TFT), 2.6 to 7.0" screen size, and panel mount or handheld installation. F900GOTs support connection to Mitsubishi sequence controllers, several other controller brands, and to other products including motion controllers, barcode readers and printers. All models configure with one easy to use software title.
F900GOT Hardware Features Include:
- Compact design for today’s compressed panel and installation space requirements
- Ultra-wide viewing angles combined with crystal clear display
- 24VDC power supply (5VDC available in F920)
- Embedded dual serial ports allowing flexible connection methods without adding cost
- Serial networking of terminals to a single target device (up to 4 terminals)
- Upgradeable OS
- Programmable function keys (keypad models only)
- IP65F environmental ratings
- Class 1, Division 2, Group A, B, C and D environmental ratings
F900GOT Terminal Features:
- Supports recipe management for easy manipulation of complex data
- Alarm management and messaging features
- Supports time switching and scheduling of events
- Supports trending and data sampling
- Supports both local and global function operations (keypad models only)
- 16 Levels of password protection (user and system levels)
- Supports graphics, text and numerical data
Advanced F900GOT Maintenance Features:
- List Editor – Ability to read/write control logic of FX controllers without a PC
- Buffer Memory Monitor– Direct access to FX2N/2NC Special Function Modules (SFM) and Buffer Memory (BFM) data locations
- Controller Diagnostics –FX controller errors are displayed
- Transparent Mode – Simultaneous serial communication of both HMI and Mitsubishi controller from a PC (transparent mode is supported by all Mitsubishi controllers)
- Other embedded system menus and diagnostics – access to advanced maintenance screens that require no user program development (available only for Mitsubishi controllers)
F900GOT Pendant Terminal Features:
- Hard wired redundant or single contact e-stop and function keys available
- Programmable 3 position grip switch or operator grip switch available
- Programmable LEDs
- Built-in communication interface
- IP54F environmental rating
- Class 1, Division 2, Group A, B, C and D environmental ratings
|
Manuals
|
Part Number
|
Description
|
Contents
|
Incl.with Product
|
|
JY992D86401
|
FX-10DM-E User's Manual
|
Introduction and Overview, Specifications, Installation and Maintenance
|
Yes
|
|
JY997D02201
|
F920GOT-BBD5-K-E Installation Manual
|
Introduction and Overview
Specifications
Installation
Maintenance
|
Yes
|
|
JY992D95701
|
F930GOT Installation Manual
|
Yes
|
|
JY997D02501
|
F930GOT-BBD-K-E Installation Manual
|
Yes
|
|
JY992D94201
|
F940GOT Installation Manual
|
Yes
|
|
JY992D93901
|
F940WGOT Installation Manual
|
Yes
|
|
JY992D86901
|
F940 HANDY GOT Hardware Manual
|
Yes
|
|
JY992D99901
|
F940 HANDY GOT (RH model) Hardware Manual
|
Yes
|
|
JY992D94701
|
GOT-F900 Series Operation Manual
|
Introduction, General specifications
Operation, Features and Functions Descriptions
|
No (purchase separately)
|
|
JY992D94801
|
GOT-F900 Series Graphic Operation Terminal Hardware Manual (connection)
|
Introduction and Overview, Installation and Connections
|
No (purchase separately)
|
|
JY992D68301
|
FX-PCS-DU/WIN-E Operation Manual
|
Introduction and Installation and Requirements
Features and Functions Descriptions
|
Yes,
with s/w title
|
|
SH(NA)080250
|
GT Works2/GT Designer2 Operating Manual (Startup - Introductory Manual)
|
Basic Software Installation Information
|
Yes,
with s/w title
|
|
SH(NA)080251
|
GT Works2/GT Designer2 Operating Manual (Reference Manual)
|
Programming Manual — Detailed information/ instruction for Objects, Features and Functions.
|
Yes,
with s/w title
|
|
SH(NA)080278
|
GT Works2/GT Designer2 Operating Manual
|
Basic Software Information — understanding dialog box, creating new projects
|
Yes,
with s/w title
|
F900GOT Terminal Base Units
|
Product
|
Model Number
|
Compliance
|
Specifications
|
Stocked Item
|
|
Text Terminal
|
FX-10DM-E
|
UL • cUL
|
2 line, 16 character backlit LCD display, 5 VDC powered
|
S
|
|
F920GOT
|
F920GOT-BBD5-K-E
|
CE • UL • cUL
|
128 x 64 LCD display, 2 color backlight (white/red), keypad/function keys, 5 VDC powered, built-in (1) RS232/422, 128Kb flash memory
|
S
|
|
F920GOT-BBD-K-E
|
CE • UL • cUL
|
128 x 64 LCD display, 2 color backlight (white/red), keypad/function keys, 24VDC powered, built-in RS232/422, 128Kb flash memory
|
–
|
|
F930GOT
|
F930GOT-BWD-E
|
UL • cUL
|
240 x 80 pixels, 2 color STN blue LCD (blue/white), 24 VDC powered, built-in (1) RS-422/(1) RS-232, 256 Kb Flash memory
|
S
|
|
F933GOT-BWD
|
—
|
240 x 80 pixels, 2 color STN blue LCD (blue/white), 24 VDC powered, built-in (2) RS-232 interface, 256 Kb Flash memory
|
–
|
|
F930GOT-BBD-K-E
|
UL • cUL
|
240 x 80 pixels, 2 color STN blue LCD (blue/white), keypad/function keys, 24 VDC powered, built-in (1) RS-422/(1)
RS-232, 256Kb Flash memory
|
S
|
|
F940GOT Terminals
|
F940GOT-LWD-E
|
UL • cUL
|
320 x 240 pixels, 2 color STN monochrome (black/white) LCD,
24 VDC powered, built-in (1) RS-422/(1) RS-232, 512Kb Flash memory
|
S
|
|
F940GOT-SWD-E
|
UL • cUL
|
320 x 240 pixels, 8 color STN LCD, 24 VDC powered, built-in (1) RS-422/ (1) RS-232, 512kb Flash memory
|
S
|
|
F943GOT-LWD
|
—
|
320 x 240 pixels, 2 color STN monochrome (black/white) LCD,
24 VDC powered, built-in (2) RS-232, 512Kb Flash memory
|
–
|
|
F943GOT-SWD
|
—
|
320 x 240 pixels, 8 color STN LCD, 24 VDC powered, built-in (2) RS-232, 512kb Flash memory
|
–
|
|
F940WGOT-TWD-E
|
UL • cUL
|
430 x 234 pixels, 7" wide, 256 colors TFT LCD, 24 VDC powered, built-in (2) RS-232 / (1) RS-422,1Mb Flash memory
|
S
|
|
Pendant/ Hand Held Terminals
|
F940GOT-LBD-H-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 2 color STN monochrome (black/white) LCD, 24 VDC powered. Built-in RS-422 communication interface, 512kb Flash memory
|
S
|
|
F940GOT-SBD-H-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 8 color STN LCD, 24 VDC powered., built-in RS-422 communication interface, 512Kb Flash memory
|
–
|
|
F943GOT-LBD-H-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 2 color STN monochrome (black/white) LCD, 24 VDC powered, built-in RS-232 communication interface, 512 Kb Flash memory
|
–
|
|
F943GOT-SBD-H-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 8 color STN LCD,
24 VDC powered, built-in RS-232 communication interface, 512 Kb Flash memory
|
–
|
|
F940GOT-LBD-RH-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 2 color STN monochrome bBlk/white) LCD, 24 VDC powered, 3 position grip switch, key lock, duel contact e-stop, built-in RS-422 communication interface, 512Kb Flash memory
|
–
|
|
F940GOT-SBD-RH-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 8 color STN LCD,
24 VDC powered, 3 position grip switch, key lock, duel contact e-stop, built-in RS-422 communication interface, 512Kb Flash memory
|
S
|
|
F943GOT-LBD-RH-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 2 color STN monochrome (blk/white) LCD, 24 VDC powered, 3 position grip switch, key lock, duel contact e-stop, built-in RS-232 communication interface, 512Kb Flash memory
|
–
|
|
F943GOT-SBD-RH-E
|
UL • cUL
|
320 x 240 pixels, hand held pendant style, 8 color STN LCD,
24 VDC powered, 3 position grip switch, key lock, duel contact e-stop, built-in RS-232 communication interface, 512Kb Flash memory
|
–
|
|
Note: All Pendant/Handy terminals require 3 components for every system:
Pendant Terminal: Base unit.
External Cable: This cable has a grommet and attaches to the terminal.
Relay cable: This is a communication cable that connects between the external cable and connected device.
|
Communications Interface
The F900GOT Series has built-in communication ports, with no optional units required.
|
Terminal
|
Communication Type
|
Cable
|
Remarks
|
|
F940GOT,
F940WGOT
F930GOT
|
MELSEC
Front port mini-din
|
RS-422
|
FX-50DU-CAB0-_ _
|
Refer to cable section
|
|
MELSEC
Front port 25 pin
|
RS-422
|
FX-40DU-CAB-_ _
|
Refer to cable section
|
|
Omron
|
RS-422
|
Cust. Supplied
|
Refer to manual for RS-422 specs
|
|
Fuji Electric
|
RS-422
|
Cust. Supplied
|
Refer to manual for RS-422 specs
|
|
Allen Bradley
Connection
|
RS-232
|
Cust. Supplied
|
Refer to manual for RS-422 specs
|
|
DH-485
|
Cust. Supplied
|
Refer to manual for DH-485 specs
|
|
F940GOT-H
|
Front port mini-din
|
RS-422
|
F9GT-HCAB-_M + F9GT-HCAB2-150
|
Refer to cable section
|
|
Front port 25 pin
|
RS-422
|
F9GT-HCAB-_M + F9GT-HCAB2-150
|
Refer to cable section
|
|
Omron
Front port mini-din
|
RS-422
|
F9GT-HCAB1-oM
|
Refer to cable section
|
|
RS-422
|
F9X-50DU-CAB0-_ _
|
|
FX-10DM-E
|
Front port 25 pin
|
RS-422
|
FX20P-CAB
|
Refer to cable section
|
|
Front port mini-din
|
RS-422
|
FX-20P-CAB0
|
Refer to cable section
|
F900 Performance Specifications
|
Product Model Name
( _ 0 or 3)
|
FX-10DM-E*
|
F940WGOT
F940WGOT-TWD-E
|
F940GOT
|
F930GOT
|
|
Item
|
F94_GOT-SWD-E
|
F94_GOT-LWD-E
|
F930GOT-BWD-E
|
F930GOT-BBD-K-E
|
|
General Specifications
|
|
|
Supply Voltage
|
5 VDC (+1%/-1%)
|
24 VDC +10, -15% (service power supply of PLC or separately prepared DC power supply)
|
|
24 VDC Current Consumption (Backlight OFF)
|
220mA @ 5 VDC
|
650mA/24 VDC *1 (400mA/24 VDC)
|
410mA/24 VDC
|
390mA/24 VDC
|
200mA/24 VDC
|
220mA/24 VDC
|
|
Fuse
|
—
|
Built-in (non-replaceable)
|
|
Allowable Momentary Power Failure Time
|
Operation continues after power failure for 5ms or less
|
|
Built-in Lithium Battery
|
—
|
PM-20BL (life: Approx. 5 years)
|
FX2NC-32BL (life: Approx. 3 years)
|
|
Ambient Temperature
|
0-50°C during operation-20°C ~ +70°C off time
|
0-50°C (*2)
|
0-50°C (*3)
|
0-50°C
|
|
Ambient Humidity
|
35 to 85% RH (no condensation)
|
|
Working Atmosphere
|
Free from corrosive gas and excessive dusts
|
|
Vibration Resistance
|
Conforms to JIS B3501: 10-55 Hz (0.5 G max.) in 3 axial directions
|
|
In conformance to JIS B3502 and IEC 61131-2
|
|
Frequency
|
Acceleration
|
Amplitude
|
10 times in each of X, Y and Z directions (for 80 min)
|
|
With intermittent vibration
|
10-57Hz
|
—
|
0.075mm
|
|
57-150Hz
|
9.8m/s2
|
—
|
|
With continuous vibration
|
10-57Hz
|
—
|
0.035mm
|
|
57-150Hz
|
4.9m/s2
|
—
|
|
|
Impact Resistance
|
In conformance to JIS B3502 and IEC 61131-2 (147 m/s2, 3 times in each of X, Y and Z directions)
|
|
Noise Resistance
|
By noise simulator of 1,000 Vp-p in noise voltage, 1 µs in noise width and 30 to 100 Hz in frequency
|
|
Withstand Voltage
|
500 VAC for 1 min (between all power terminals and ground terminal)
|
|
Insulation Resistance
|
5 M? or more by 500 VDC megger (between all power terminals and ground terminal)
|
|
Grounding
|
—
|
Class D grounding (if grounding is impossible, it can be omitted)
|
|
Protective Rating
|
IP65F
|
Equivalent to IP65F *7 *8
|
|
SCREEN DISPLAY SPECIFICATIONS
|
|
|
Display Device
|
STN LCD (green back)
|
TFT color LCD
|
STN color LCD
|
STN monochrome LCD
|
STN monochrome LCD
|
|
Number of Colors
|
N/A
|
256 colors
|
8 colors
|
2 colors
(white and black)
|
2 colors (white and blue)
|
|
Resolution
|
80 x 16 dots, 11.6 x 56.2 min.
|
480 x 234 dots 60 characters x 14 lines
|
320 x 240 dots 40 characters x 15 lines
|
240 x 80 dots 30 characters x 5 lines
|
|
Dot Pitch
|
—
|
0.324mm (0.013")
|
0.36mm (0.014") x 0.36 mm (0.014")
|
0.47mm (0.019") x 0.47mm (0.019")
|
|
Effective Display Size (Horizontal x Vertical)
|
2 lines x 16 characters
|
0.375 mm (0.015") Vertical 7"(6.7") diagonal 155 mm (6.12") x 87.8 mm (3.46")
|
6" (5.7") diagonal 115 mm (4.53") x
86 mm (3.39")
|
4" (4.4) diagonal 117 mm (4.61") x
42 mm (1.65")
|
|
Range of View Angle
|
30° left and right; up and down 30°
|
—
|
Left and right: 50°, Upper: 45°,
Lower: 60°
|
Left and right: 30°, Upper and
Lower: 30°
|
Left and right: 30°, Upper: 20°,
Lower: 30
|
|
Max. Number of Screens
|
Predefined menu screens
|
500 User screens 30 System screens
|
500 User screens No. 1001-1030
System screens allocated
|
500 User screens No. 1001-1030
System screens allocated
|
|
Language Displayed on the User Screen
|
English
|
English, Western Europe *4, Korean, Chinese (Simplified, Traditional), Japanese (Shift JIS level 1, 2)
|
English, Western Europe *4, Korean, Japanese (Shift JIS level 1)
|
|
Life
|
Display Element
|
Approx. 50,000 hours or more (working temperature: 25°C) Guarantee period is 1 year
|
|
Backlight *5
|
50,000 hours or more
|
40,000 hours or more
|
50,000 hours or more
|
|
LED backlight
|
Cold cathode fluorescent tube backlight (working temperature: 25°C), Guarantee period is 1 year
|
|
User Memory
|
Screen Data
|
EEPROM
|
Flash memory 1 MB (built-in)
|
Flash memory 512kB (built-in)
|
Flash memory 256kB (built-in)
|
|
Other Data
|
—
|
RAM (keeps recipe, alarm frequency, alarm history and sampling data)
|
|
ROM Transfer
|
—
|
(F9GT-40FMB only)
|
F9GT-40FMB
|
—
|
|
Touch Keys
|
—
|
Max. 50 touch keys / screen, 30 x 12 matrix
|
Max. 50 touch keys / screen, 20 x 12 matrix
|
Max. 50 touch keys / screen, 15 x 4 matrix
|
|
COMMUNICATIONS
|
|
|
Serial Interface
|
RS-232C
|
—
|
9-pin D-Sub, male port, 2 channels, #4-40UNC Inch screw thread
|
9-pin D-Sub, male port, #4-40UNC Inch screw thread
|
|
RS-422
|
8-pin Mini-Din female
|
9-pin D-Sub, female port, M2.6 Metric screw thread
|
|
External I/O Connection
|
Operation Switch
|
5 switches
|
—
|
|
Emergency Stop Switch
|
—
|
|
— = Cannot Connect.
*Communication Note: FX-10DM-E only communicates with SuperMicro Controllers (FX Series)
Notes:
1. When the power is turned ON a maximum current of 750 mA/24 VDC is consumed.
2. 0 to 50°C when the screen is installed laterally. 0 to 40°C when the screen is installed vertically or horizontally.
3. 0 to 40°C when the extension interface is used.
4. Western European languages: Italian, Dutch Swedish, Spanish, German, Portuguese, French.
5. The life of the backlight above indicates the value at 25°C.
7. This test result does not provide any guarantees that the product stands against use in all type of environment.
As regarding the front panel.
|
Performance Specifications (cont’d)
|
Product Model Name ( _ 0 or 3)
|
F920GOT-K
|
Handy GOT
|
Handy RH-GOT
|
|
Item
|
F920GOT-BBD-K-E
|
F920-BBDS-K-E
|
F94_GOT-SBD-H-E
|
F94_GOT-LBD-H-E
|
F94_GOT-SBD-RH-E
|
F94_GOT-LBD-RH-E
|
|
General Specifications
|
|
|
Supply Voltage
|
24 VDC +10, -15% (service power supply of PLC or separately prepared DC power supply)
|
5 VDC ±5% (Supplied from PLC)
|
24 VDC +10, -15%
(service power supply of PLC or separately prepared DC power supply)
|
|
24 VDC Current Consumption (Backlight OFF)
|
80mA/24 VDC (70mA/24 VDC)
|
220mA/5 VDC (180mA/5 VDC)
|
300mA/24 VDC , (200mA/24 VDC)
|
|
Fuse
|
Built-in (non-replaceable)
|
—
|
Built-in (non-replaceable)
|
|
Allowable Momentary Power Failure Time
|
Operation continues after power failure for 5ms or less
|
—
|
Operation continues after power failure for 5ms or less
|
|
Built-in Lithium Battery
|
—
|
FX2NC-32BL (life: Approx. 3 years)
|
|
Ambient Temperature
|
0-50°C
|
0-40°C
|
|
Ambient Humidity
|
35 to 85%RH (no condensation)
|
|
Working Atmosphere
|
Free from corrosive gas and excessive dusts
|
|
Vibration Resistance
|
|
In conformance to JIS B3502 and IEC 61131-2
|
|
Frequency
|
Acceleration
|
Amplitude
|
10 times in each of X, Y and Z directions (for 80 min)
|
|
With intermittent vibration
|
10-57 Hz
|
—
|
0.075 mm
|
|
57-150 Hz
|
9.8/s2
|
-
|
|
With continuous vibration
|
10-57 Hz
|
—
|
0.035mm
|
|
57-150 Hz
|
4.9m/s2
|
—
|
|
|
Impact Resistance
|
In conformance to JIS B3502 and IEC 61131-2 (147 m/s2, 3 times in each of X, Y and Z directions)
|
|
Noise Resistance
|
500V AC for 1 min (between all power terminals and ground terminal)
|
|
Withstand Voltage
|
500 VAC for 1 min *3
|
By noise simulator of 1,000 Vp-p in noise voltage,
1 µs in noise width and 30 to 100 Hz in frequency
|
|
Insulation Resistance
|
5M? or more by 500 VDC megger *3
|
5M? or more by 500V DC megger (between all power
terminals and ground terminal)
|
|
Grounding
|
Class D grounding (if grounding is impossible, it can be omitted)
|
—
|
Class D grounding (if grounding is impossible, it can be omitted)
|
|
Protective Rating
|
Equivalent to IP65f *4 *5
|
Equivalent to IP54 *4
|
|
Screen Display Specifications
|
|
|
Display Device
|
STN monochrome LCD
|
STN color LCD
|
STN monochrome LCD
|
STN color LCD
|
STN monochrome LCD
|
|
Number of Colors
|
2 colors (white and blue)
|
8 colors
|
2 colors (white and black)
|
8 colors
|
2 colors (white and black)
|
|
Resolution
|
128 x 64 dots, 16 characters x 4 lines
|
320 x 240 dots, 40 characters x 15 lines
|
320 x 240 dots, 40 characters x 15 lines
|
|
Dot Pitch (Horizontal x Vertical)
|
0.47mm (0.019") x 0.47mm (0.019")
|
0.36mm (0.014") x 0.36mm (0.014")
|
|
Effective Display Size
|
3"(2.6") diagonal 60 mm (2.36") x 30 mm (1.18")
|
6" (5.7") diagonal 115 mm (4.53") x 86 mm (3.39")
|
6" (5.7") diagonal 115 mm (4.53") x 86 mm (3.39")
|
|
Range of View Angle
|
Left and right: 40°, Upper and lower: 40°
|
Left and right: 50°, Upper: 45°, lower: 60°
|
Left and right: 30°, Upper and lower: 30°
|
|
Max. Number of Screens
|
500 User screens No. 1001-1030 System screens allocated
|
|
Language Displayed on the User Screen
|
English, Western Europe *1,
Korean, Japanese (Shift JIS level 1, 2)
|
English, Western Europe *1,
Korean, Chinese (Simplified, Traditional), Japanese (Shift JIS level 1)
|
|
Life
|
Display Element
|
Approx. 50,000 hours or more (working temperature: 25°C) Guarantee period is 1 year
|
|
Backlight *2
|
—
|
40,000 hours or more
|
|
LED (Red/White)
|
Cold cathode fluorescent tube backlight (working temperature: 25°C),
Guarantee period is 1 year
|
|
User Memory
|
Screen Data
|
Flash memory 128kB (built-in)
|
Flash memory 512kB (built-in)
|
Flash memory 512kB (built-in)
|
|
Other Data
|
EEPROM (keeps recipe, alarm frequency, alarm history)
|
RAM (keeps recipe, alarm frequency, alarm history and sampling data)
—
|
|
ROM Transfer
|
—
|
|
Touch Keys
|
—
|
Max. 50 touch keys / screen, 20 x 12 matrix
|
|
CommunicationS
|
|
|
|
Serial Interface
|
RS-232C
|
9-pin D-Sub, male port,
#4-40UNC Inch screw thread
|
9-pin D-Sub, male connector (screen data transfer dedicated to personal computer port)
|
| |
RS-422
|
9-pin D-Sub, female port,
M2.6 Metric screw thread
|
Dedicated port F940GOT-_BD-(R)H: RS-422 F943GOT-_BD-(R)H: RS-232C
|
|
External I/O Connection
|
Operation Switch
|
—
|
4 switches (4 contacts/ common) External cable (with 25-pin D-Sub connector or untied)
|
4 switches (4 contacts/ common)
External cable (with 37-pin D-Sub connector)
|
|
Emergency Stop Switch
|
—
|
1 switch (single contact) External cable (with 25-pin D-Sub connector or untied)
|
1 switch (dual contact) External cable
(with 37-pin D-Sub connector)
|
Notes:
1. Italian, Dutch Swedish, Spanish, German, Portuguese, French.
2, The life of the backlight above indicates the value at 25°C.
3. Between all power terminals of the PLC and ground terminal.
4. This test result does not provide any guarantees that the product stands against use in all types of environment.
As regarding the front panel.
B. F900GOT Cables
|
Product
|
Model Model
|
Length
|
Specifications
|
Stocked Item
|
|
Communication Cables for Standard Terminal
|
FX-50DU-CAB0
|
3m
|
Cable to connect GOT to FX0, FX0S, FX0N, FX2NC (9 pin D-SUB male to 8 pin Mini-Din male)
|
S
|
|
FX-50DU-CAB0-1M
|
1m
|
Cable to connect GOT to FX0, FX0S, FX0N, FX2NC (9 pin D-SUB male to 8 pin Mini-Din male)
|
–
|
|
FX-50DU-CAB0-10M
|
10m
|
Cable to connect GOT to FX0, FX0S, FX0N, FX2NC (9 pin D-SUB male to 8 pin Mini-Din male)
|
–
|
|
FX-50DU-CAB0-20M
|
20m
|
Cable to connect GOT to FX0, FX0S, FX0N, FX2NC (9 pin D-SUB male to 8 pin Mini-Din male)
|
–
|
|
FX-50DU-CAB0-30M
|
30m
|
Cable to connect GOT to FX0, FX0S, FX0N, FX2NC (9 pin D-SUB male to 8 pin Mini-Din male)
|
–
|
|
FX-50DU-CAB0L
|
3m
|
Cable to connect GOT to FX0, FX0S, FX0N, FX2NC (9 pin D-SUB male to 8 pin Mini-Din male) 90 degree connector
|
–
|
|
FX-40DU-CAB
|
3m
|
Cable to connect GOT to FX1, FX2, FX2C and A Series (25 pin D-SUB male to 25 pin D-SUB male)
|
S
|
|
FX-40DU-CAB-10M
|
10m
|
Cable to connect GOT to FX1, FX2, FX2C and A Series (25 pin D-SUB male to 25 pin D-SUB male)
|
–
|
|
FX-40DU-CABL
|
3m
|
Cable to connect GOT to FX1, FX2, FX2C and A Series (25 pin D-SUB male to 25 pin D-SUB male) 90 degree connector
|
–
|
|
FX-20P-CAB
|
3m
|
Cable to connect FX-10DM-E to PLC (8 pin Mini-Din to 25 pin D-SUB)
|
–
|
|
FX-20P-CAB0
|
1.5m
|
Cable to connect FX-10DM-E to PLC (8 pin Mini-Din to 8 pin mini-din)
|
S
|
|
B1
External Cable
for -H
Pendants
|
F9GT-HCAB-3M
|
3m
|
Communication cable from actual GOT pendant to additional PLC connecting cable. (Grommet : 25 pin)
|
S
|
|
F9GT-HCAB-10M
|
10m
|
Communication cable from actual GOT pendant to additional PLC connecting cable. (Grommet : 25 pin)
|
S
|
|
F9GT-HCAB1-3M
|
3m
|
Communication cable from F9GT-HCAB_ _M directly to power and an A(1S)J71-UC24 Computer Link module. (Grommet : Open leads)
|
–
|
|
F9GT-HCAB1-10M
|
10m
|
Communication cable from F9GT-HCAB_ _ M, directly to power and an A(1S)J71-UC24 Computer Link module. (Grommet : Open leads)
|
–
|
|
C1
Communication Cable for -H Pendants
|
F9GT-HCAB2-150
|
1.5m
|
Communication cable from F9GT-HCAB-_ _M, to power and PLC front port (for FX0S, FX01S, FX1N, FX0N, FX2N,FX2NC) (25 pin : 8 pin)
|
S
|
|
F9GT-HCAB3-150
|
1.5m
|
Communication cable from F9GT-HCAB-_ _M, to power PLC front port (for FX, A, Ans(H), QnAS(H) (25:25 pin)
|
–
|
|
F9GT-HCAB5-150
|
1.5m
|
Communication cable from F9GT-HCAB-_ _M, to power PLC front port (for QCPU) (25 pin : 6 pin)
|
–
|
|
B2
External
Cable for
-RH Pendants
|
F9GT-RHCAB-3M
|
3m
|
Communication cable from actual GOT (-RH) to additional PLC connecting cable (Grommet : 37 pin)
|
S
|
|
F9GT-RHCAB-6M
|
6m
|
Communication cable from actual GOT (-RH) to additional PLC connecting cable (Grommet : 37 pin)
|
–
|
|
F9GT-RHCAB-10M
|
10m
|
Communication cable from actual GOT (-RH) to additional PLC connecting cable (Grommet : 37 pin)
|
S
|
|
C2
Communication Cable for -RH Pendants
|
F9GT-RHCAB1-3M
|
3m
|
Communication cable from F9GT-RHCAB-_ _ M to PLC or C24 module (Grommet: Open leads)
|
–
|
|
F9GT-RHCAB1-10M
|
10m
|
Communication cable from F9GT-RHCAB-_ _ M to PLC or C24 module (Grommet: Open leads)
|
–
|
|
F9GT-RHCAB2-150
|
1.5m
|
Communication cable from F9GT-RHCAB-_ _ M to PLC front port (FX1S/1N/2N/2NC) (37 pin : 8 pin)
|
S
|
|
F9GT-RHCAB3-150
|
1.5m
|
Communication cable from F9GT-RHCAB-_ _ M to PLC front port (A/FX Series) (37 pin : 25 pin)
|
S
|
|
F9GT-RHCAB5-150
|
1.5m
|
Communication cable from F9GT-RHCAB-_ _ M to PLC front port (QCPU) (37 pin : 6 pin)
|
–
|
|
Conversion Box
|
F9GT-HCNB
|
—
|
Communication cable adapter
|
–
|
|
Programming Cable
|
FX-232CAB-1
|
3m
|
Programming cable from PC to GOT terminal (9 pin D-SUB female to 9 pin D-SUB female)
|
S
|
| Note: When configuring Pendant systems, make sure that correct cables are specified as these terminals require specialized cables that are not compatible across two versions (H vs. RH). H type Pendant Systems require correct cables from section B1 and C1. RH Pendant Systems require correct cables from section B2 and C2 from chart above. |
C. F900GOT Options and Accessories
|
Product
|
Model Number
|
Specification
|
Specification
|
|
Screen Data
Transfer Board
|
F9GT-40FMB
|
Flash cassette (1 Mbytes) for transferring screen data to/from FGOT (F94_(W) only)
|
S
|
|
F9GT-40UMB
|
Board for transferring user created screen data to / from the GOT to EPROM (F94_ only)
|
–
|
|
EPROM
|
FX-EPROM-4M
|
For storing user created screen data (Used together with F9GT-40UMB)
|
–
|
|
Backlight
|
F9GT-40LTS
|
Field replacement backlight (F94_ only)
|
S
|
|
F9GT-30LTB
|
Field replacement backlight (F93_ only)
|
S
|
|
Lithium
Replacement
Battery
|
PM-20BL
|
Battery backup for alarm, sampling data and the like, 5 year life. (Battery is not required for screen data since it is kept in flash memory.) F940, F940W terminals only.
|
–
|
|
FX2NC-32BL
|
Battery backup for alarm, sampling data and the like, 5 year life. (Battery is not required for screen data since it is kept in flash memory.) F930, F930-K, Handy terminals only.
|
S
|
|
Screen
Protective Sheet
|
F9GT-30PSC
|
Transparent sheet for F930GOT (5 sheets / pack)
|
S
|
|
F9GT-40PSC
|
Transparent sheet for F940GOT (5 sheets / pack)
|
S
|
|
F9WGT-40PSC
|
Transparent sheet for F940WGOT (5 sheets / pack)
|
S
|
|
Conversion Box
|
F9GT-HCNB
|
Panel mount communications adapter (Quick Disconnect) interface. For Handy Redundant Terminals (RS-422 comms. only)
|
–
|
D. Screen Configuration Software and Programming Cable
|
Software Part Number
|
Programming Cable Part Number
|
|
GT-WORKS2-C1
|
AC30R2-9SS or FX-232CAB-1
|
F900 Dimensions
|
Specifications
|
External : mm (inch)
|
|
Product
|
A
|
B
|
C
|
D
|
E
|
F
|
|
FX-10DM-E
|
96 (3.78)
|
86 (3.39)
|
62 (2.44)
|
32 (1.26)
|
53 (2.09)
|
4.5 (0.18)
|
|
F93_GOT-_
|
146 (5.75)
|
136 (5.35)
|
75 (2.95)
|
49 (1.93)
|
65 (2.56)
|
4 (0.16)
|
|
F94_GOT-_
|
162 (6.38)
|
152 (5.98)
|
130 (5.12)
|
57 (2.24)
|
120 (4.72)
|
5 (0.20)
|
|
F94_GOT-H-_
|
156 (6.14)
|
172 (6.77)
|
191 (7.52)
|
63.5 (2.5)
|
N/A
|
N/A
|
|
F940WGOT-E
|
215 (8.46)
|
205 (8.07)
|
133 (5.24)
|
70.5 (2.76)
|
123 (4.84)
|
5 (0.20)
|
|
F920GOT-K
|
109 (4.29)
|
99 (3.90)
|
134 (5.28)
|
35.5 (1.39)
|
118 (4.64)
|
5 (0.20)
|
|
F930GOT-K
|
168 (6.61)
|
154 (6.06)
|
183 (7.20)
|
37.5 (1.48)
|
169 (6.65)
|
6.4 (0.25)
|
|
F94_GOT-RH-_
|
156 (6.14)
|
N/A
|
191 (7.52)
|
69.5 (2.73)
|
N/A
|
N/A
|
|
Specifications
|
Panel Cutout: mm (inch)
|
|
FX-10DM-E
|
87 +1/-0 x 54 +1/-0 (3.425 +0.04 / -0.00 x 2.125 +0.04 / -0.00)
|
|
F93_GOT-_
|
137 +1/-0 x 66 +1/-0 (5.393 +0.04 / -0.00 x 2.598 +0.04 / -0.00)
|
|
F94_GOT-_
|
153 +1/-0 x 121 +1/-0 (6.02 +0.04 / -0.00 x 4.76 +0.04 / -0.00)
|
|
F94_GOT-H-_
|
N/A
|
|
F940WGOT-E
|
206 +1/-0 x 124 +1/-0 (8.11 +0.04 / -0.00 x 4.88 +0.04 / -0.00)
|
|
F920GOT-K
|
92 +1/-0 x 119 +1/-0 (3.62 +0.04 / -0.00 x 4.69 +0.04 / -0.00)
|
|
F930GOT-K
|
155 +1/-0 x 170 +1/-0 (6.10 +0.04 / -0.00 x 6.69 +0.04 / -0.00)
|
|
F94_GOT-RH-_
|
N/A
|
F940GOT Supported CPU and Communication Drivers
|
PLC — GOT Connection
|
Programming Software
|
F940WGOT
|
F940GOT
|
F930GOT
|
F940 Handy Series
|
|
GT Designer 2
|
F940WGOT-TWD-E
F940WGOT-TWD-C
|
F940GOT-SWD-E
F940GOT-LWD-E
|
F930GOT-BWD-E
F930GOT-BWD-C
F930GOT-BWD-T
|
F940GOT-SBD-H-E
F940GOT-LBD-H-E
|
F943GOT-SBD-H-E
F943GOT-LBD-H-E
|
|
Mitsubishi Electric
|
FX Series
|
X
|
X (*1)
|
X
|
X
|
X
|
X *1
|
|
A, QnA Series Motion Controller
|
X
|
X
|
X
|
X
|
X
|
—
|
|
Q Series
|
X
|
X
|
X
|
X
|
X
|
X
|
|
A Computer Link Unit: QnA, Q Serial Communication Unit
|
X
|
X
|
X
|
X
|
X
|
X
|
|
FX Positioning (10/20GM)
|
X
|
X
|
X
|
X
|
X
|
X
|
|
Inverter A500, E500, S500
|
X
|
X
|
X
|
X
|
X
|
—
|
|
Other
PLCs
|
General (Microcomputer)
|
X
|
X
|
X
|
X
|
X
|
—
|
|
Omron (SYSMAC C Series)
|
X
|
X
|
X
|
X
|
X
|
X
|
|
Fuji Electric (FLEX-PC N Series)
|
X
|
X
|
X
|
X
|
X
|
X
|
|
Matsushita Electric Works (FP, FP? Series)
|
X
|
X
|
X
|
X
|
X
|
X
|
|
Yasukawa Electric (Machine Controller)
|
X
|
X
|
X
|
X
|
X
|
X
|
|
Allen-Bradley (SLC500, MicroLogix Series)
|
X
|
X
|
X
|
X
|
—
|
X
|
|
Siemens AG (SISMATIC S7-200, S7-300 Series)
|
X
|
X
|
X
|
X
|
—
|
X
|
|
Bar Code Reader, Printer
|
X
|
X
|
X
|
X
|
X
Enabled when RS-232C post is available
|
|
Connection of Two or More GOT Units
|
X
|
X
|
X
Enabled when RS-232C port is available
|
X
One unit can be connected
|
Note: The RS-232C adapter board is necessary.
F940GOT Supported CPU and Communication Drivers (cont.)
|
PLC — GOT Connection
|
F940 Handy Series (RH Model)
|
F930GOT with Keypad
|
F920GOT with Keypad
|
|
F940GOT-SBD-RH-E
F940GOT-LBD-RH-E
|
F943GOT-SBD-RH-E
F943GOT-LBD-RH-E
|
F930GOT-BBD-K-E
F930GOT-BBD-K-C
|
F920GOT-BBD5-K-E
F920GOT-BBD5-K-C
|
F920GOT-BBD-K-E
F920GOT-BBD-K-C
|
|
Mitsubishi Electric
|
FX Series
|
X
|
X *1
|
X
|
X
|
X
|
|
A, QnA Series Motion Controller
|
X
|
—
|
X
|
—
|
—
|
|
Q Series
|
—
|
—
|
X
|
X
|
X
|
|
A Computer Link Unit: QnA, \ Q Serial Communication Unit
|
X
|
X
|
X
|
—
|
X
|
|
FX Positioning (10/20GM)
|
X
|
X
|
X
|
—
|
—
|
|
Inverter A500, E500, S500
|
X
|
—
|
X
|
—
|
—
|
|
Other PLCs
|
General (Microcomputer)
|
X
|
—
|
X
|
—
|
X
|
|
Omron (SYSMAC C Series)
|
X
|
X
|
X
|
—
|
X
|
|
Fuji Electric (FLEX-PC N Series)
|
X
|
X
|
X
|
—
|
—
|
|
Matsushita Electric Works (FP, FP? Series)
|
X
|
X
|
X
|
—
|
X
|
|
Yasukawa Electric (Machine Controller)
|
X
|
X
|
X
|
—
|
—
|
|
Allen-Bradley (SLC500, MicroLogix Series)
|
—
|
—
|
X
|
—
|
X
|
|
Siemens AG (SISMATIC S7-200, S7-300 Series)
|
—
|
—
|
X
|
—
|
X Except S7-200
|
|
Bar Code Reader, Printer
|
X
|
X
|
X
|
—
|
—
|
|
Connection of Two or More GOT Units
|
X
|
X
|
X
|
—
|
—
|
 |
|
Table
of Contents
|
|
